Osmo Top Oil is a strong, durable oil designed to enhance the natural beauty of wood on tables and kitchen worktops. Based on natural waxes and oils, Osmo Top Oil does not peel, flake, crack or blister allowing for good performance in high humidity areas. Hard wearing with excellent resistance against water, juices, wine, beer and fizzy drinks.
Osmo Top Oil is a strong, durable oil designed to enhance the natural beauty of wood on tables and kitchen worktops.
Based on natural waxes and oils, Osmo Top Oil does not peel, flake, crack or blister allowing for good performance in high humidity areas.
Hard wearing with excellent resistance against water, juices, wine, beer and fizzy drinks.
Ensure that real wood kitchen work surfaces and worktops are clear of dirt, debris and other contaminates before applying Osmo Top Oil. New or previously oiled work tops can be lightly sanded prior to applying the oil with a 120 – 150 grit paper. White spirit can also be used to remove impurities and other contaminates from the surface of the wood.
To remove existing paint or varnishes, use a Paint and Varnish Remover.
Note: This product must be stirred thoroughly prior to application.
This product has a creamy consistency and is quick and easy to apply with a cloth, roller or paint brush. Apply THINLY with 2 coats total. No primer is required.
The grain of the wood is enhanced once this product has been applied and if the final finish is not shiny enough, buffing it with a cloth will create a sheen. Because the natural oils and waxes penetrate deep into the surface they help to keep the wood supple thus preventing it from getting dry and brittle and reducing swelling and shrinkage.
Osmo Top Oil Natural 3068
Note: Osmo Top Oil 3068 Natural may produce a slightly milky or white film effect on some timbers such as Iroko and other exotic dark hardwoods. This is caused by the very small amount of white pigment that Osmo add to the oil to produce the natural, unfinished look on woods such as Oak, Pine, Larch, Beech and other lighter wood work tops.
Always do a test area before starting any project.
Kitchen work surfaces and table tops that have been treated with Osmo TopOil can be cleaned with Osmo Wash And Care and water on a damp cloth and wiped dry. Stubborn marks and stains can be removed by using Osmo Liquid Wax Cleaner, that both cleans and regenerates oiled surfaces.
Should this product get marked it is easy to repair. Normally a clean and a re-application of the top oil is enough to make most marks disappear. However if a wine stain (for example) has been left over night it may start to penetrate deeper than usual. In this instance the area can be lightly sanded with a finishing pad and then refinished with the top oil.
If applying with a brush, clean used brushes immediately after use with white spirit before the oil hardens. Wash out any application cloths immediately or store in a airtight container (danger of spontaneous-combustion).
Osmo Top Oil has a shelf life of 5 years or more if the tin remains closed. If only part of the tin is used, pour the remaining oil into a smaller bottle, jar or container and fill to the rim before sealing with an air tight lid. The remaining oil should be stored somewhere where the temperature does not fall below 5℃ or exceed 25℃, such as an under-stairs cupboard. This will help to preserve the life of the oil for longer.
Coats of top oil should be allowed to dry overnight for at least 8 to 10 hours. Room temperature, humidity and type of wood can all influence the overall drying time.
If a deeper satin finish is required, the oiled surface can be polished with Osmo Liquid Wax Cleaner once the surface has fully dried.